Devolo MicroLink dLAN Audio - Manual (Page 13)

|
Introduction 13
| devolo MicroLink dLAN Audio |
EN
an MP3 file. As the PC can play back the MP3 files directly, no external
decoder is required to do so.
b
With two MicroLink dLAN Audio adapters, you can for example transfer
music from your stereo system via the power supply network to another
room for playback via active speakers.
The hi-fi audio signal from the stereo system is transferred via the stan-
dard outputs to the MicroLink dLAN Audio adapter. In the MicroLink
dLAN Audio, the integrated MP3 encoder converts the hi-fi audio signal
into the MP3 format. The dLAN adapter transfers this data format via the
power supply grid to the MicroLink dLAN Audio into another room. The
MP3 format is converted back into a hi-fi audio signal (decoded) and
played back over the active speakers.
Additional examples for the use of the MicroLink dLAN Audio adapter are
provided in the chapter on “Application examples” on page 43.
Simple installation
b Connect the MicroLink dLAN Audio using the appropriate inputs/outputs
to the stereo system, satellite receiver, microphone or active speakers.
b
Connect MicroLink dLAN Audio to the power supply grid.
b Install the devolo MicroLink dLAN software.
b
That's it!
Meets the highest quality requirements.
All devolo products undergo comprehensive quality assurance testing. Thus
devolo ensures optimum functionality with various operating systems, coun-
try variants and protocols.
MicroLink dLAN
Audio
Stereo system
MicroLink dLAN Audio
Active speakers
Converting hi-fi audio
into MP3 (encoding)
Hi-fi audio
signal
MP3
Hi-fi audio signal
MP3
Converting MP3 into hi-
fi audio (decoding)
Direction of music flow