Delta Dore RF 642 - Manual (Page 9)

- 17 -
The simple lighting mode can be associated with a
TYDOM transmitter.
To associate the receiver with TYDOM devices, please
refer to the respective guides.
TYDOM3 xx telephone tran s mitter
TYDOM 2xx multifunction remote control
TYDOM 3 xx en ab le s the ON/OFF
fe a t u re to b e oper a ted remotely.
TYDOM 2xx b ring s together a ll the
f u nction s of the TYXIA bu tton s :
- 16 -
The simple lighting mode can be associated with
a TYXAL alarm control unit.
On the control unit, enable the Maintenance
mode (see control unit guide).
On the receiver, press the button until the LED flashes
(~3 seconds).
Slow flashing:
➪ alarm status transfer
- Light on when the control unit is in surveillance
mode
- Light off when the control unit is not in surveillance
mode.
Quick flashing:
➪ transfer of alarm surveillance activation/deactivation
- set to surveillance mode: lights flash once
- disabling surveillance mode: lights flash twice
Press the button to switch from one rate of flashing to
the other.
Press the “Test” button of the control unit.
Check that the receiver’s LED is no longer flashing.
The control unit is associated with the receiver.
Simple lighting mode with an associated
TYXAL control unit
Simple lighting mode with an associated
TYDOM transmitter