Delta Dore T1C-2 DIGIT - Manual

The DELTA DORE sensor range covers all applications.
These sensors are interchangeable:
Self-adhesive projecting ambient temperature sensor
Built-in projecting ambient temperature sensor (Mosaic)
Ambient temperature sensor for places of assembly
Ambient temperature sensor for industrial premises
Outdoor sensor
Ground/piping/blower sensor
Because of changes in standards and equipment, the characteristics given in the text and the illustrations of this document are not binding unless
confirmed by Delta Dore.
Device complying with the requirements of the directives:
2004/108/EEC (electromagnetic compatibility)
and 2006/95/EEC (low voltage safety).
DELTA DORE
Bonnemain - 35270 COMBOURG - France
E-mail : [email protected]
T1C-2 digit is mounted on a DIN rail in an electrical cabinet.
1 Sensor input
2 Selector switch :
User mode/Installer mode
3 Output state : Lit = On
4 Temperature display
5 Scroll button
6 Changeover relay output
7 Power supply
8 Fault indicator (flashing)
9 Modification buttons
10 Displayed temperature type indicator
(On = Setpoint, Off = Measured temperature)
6 7
9
8
1 2
3
4
5
10
• Power supply 230 V ± 10%, 50 Hz
• Insulation class II
• Consumption: 2 VA
• 1 changeover contact output, 5 A, 230 V
• Setpoint adjustable from -9.5 °C to +90 °C
• Differential adjustable from 0.2 °C to 2 °C in
0.1 °C steps
• Sensor input: NTC type 1000 Ω at 25 °C
• Digital display (setpoint or measured
temperature, output state)
• Modular case: 3 modules, h = 58 mm
• DIN rail mounting
• Protection index: IP 40
T1C
-2
Digit
Digital display electronic thermostat
1. Description
2. Mounting
The T1C-2 digit is a snap action electronic thermostat.
It is suitable for all cases where temperature control is necessary, including rooms, air
ducts, liquids, solids...
7. Technical characteristics
8. Sensors
*2702300_Rev.1*