Delta Dore RF 642 - Manual (Page 12)

- 23 - - 22 -
Troubleshooting
You cannot associate a transmitter with your
receiver.
The maximum number of transmitters that can be associated
with a receiver function is 8.
Check that this number has not been reached.
Lights only come on for 1 second each time a button is
pressed.
Pulse mode is enabled.
Put the unit into simple lighting mode (refer to the “Simple
lighting mode” section).
The receiver does not recognize the command from a
transmitter.
• The transmitter is not associated with the receiver.
• The receiver is still in association mode.
• The transmitter batteries are low.
No LED lights up on the receiver.
The receiver is not powered.
Check the receiver power supply line.
You want to associate the receiver again .
You must start by removing all the wireless associations
(pulse, simple lighting or roller shutters mode)