Delta Dore RF 642 - Manual (Page 10)

- 19 -
Operation with an associated TYXIA or TYDOM
transmitter
On the receiver, press the button until the LED flashes
(~3 seconds).
You now have two options.
Slow flashing: simple lighting mode
Quick flashing: pulse mode
Press the receiver button briefly to switch from
one rate of flashing to the other.
Select the quick flashing option.
On the transmitter, press and hold the
button
down for 5 seconds.
The button will light up, go out then light up again.
Release.
Check that the receiver’s LED is no longer flashing.
The transmitter button is associated with
the receiver in pulse mode.
To associate a TYXIA RF 642 with a TYDOM 2xx,
please refer to the TYDOM 2xx guide.
The pulse mode can only be controlled by a
(TYXIA) or
(TYDOM 2xx) button.
OR
(status being modified)
Pulse mode (remote control switch, garage
door, electric gate)
- 18 -
Connection
Operation on the TYXIA RF 642
Pressing the button on the receiver changes the
current state (on or off).
Remote s witch Control of a n
opening (for
ex a mple: a g a te).
M a in s
2 3 0V
IMPORTANT: To use the receiver in pulse mode, it
must be associated with a transmitter.