Delta Dore RF 642 User Manual
Page 4
- 7 -
- 6 -
Removing the cover
To remove the cover, push the
tab and lift the cover.
Attachment with screws
Mounted on a wall using the
screws and plugs supplied.
Mounting by double-sided
adhesive tape
Mounted on a wall using the double-
sided adhesive tape supplied.
Ensure that the surface on which the
tape is applied is thoroughly clean
before mounting.
Connection
To connect the control wires, run the
wires along the raceway provided or
by piercing the hole at
➊
.
Refer to the section that deals with
your type of installation.
When the connection is made, fit the
cover and switch on the current at
the circuit breaker.
Mounting
1
2
1