Delta Dore 610 TYBOX User Manual
Tybox 610, Weekly programmable thermostat, 1 - description

PROG
AUTO
TYBOX
0h 2
4
6
8 10 12 14 16 18 20 22 24
1234567
i
PR
OG
AUTO
0h 2
4
6
8 10 12 14 16 18 20 22 24
TYBOX 610
Weekly programmable thermostat
User guide
This appliance is compliant with the requirements of
directives 2004/108/EC (Electromagnetic Compatibility)
and 2006/95/EC (Low-Voltage Safety)
Because of changes in standards and equipment, the characteristics given in the text and the illustrations provided in this
document are not binding unless expressly confirmed
*2702304_Rev.3*
1
2
3
1
2
3
1 - Description
Thermostat
Selector dial
Information
button
Selector dial
Modification
buttons (function
dependent)
Manual mode
Shutdown
Set-point
temperature setting
Configuration mode
Time setting
Programming
Automatic mode
2 - Time setting
Turn the selector dial to the position marked
.
The day numbers flash.
• Press + or - to set the day, then OK to confirm and
go to the next setting.
Repeat these steps to set the hours and minutes.
To exit the “time setting” mode, turn the selector dial.
Days
Hours
Minutes
(1: Monday… 7: Sunday)
3 - Set-point temperature setting
Turn the selector dial to
This mode is used to select the setback and
comfort set-point temperatures.
Note:
Only the setback set-point temperature
will be available to you if you have opted
for the comfort setting for every radiator
(menu CF03) of the “installation guide”.
• Press + or - to set the comfort temperature,
then confirm with OK to move to the next
setting for the setback temperature.
Confirm again with OK.
The set-point temperatures are adjustable
from 5 to 30°C in heating mode and from
18 to 35°C in cooling mode in steps of
0.5°C. To set the cooling set-point tempe-
ratures, switch the thermostat to cooling
mode (refer to the heating / cooling mode
change menu).
Setting the comfort
temperature
Confirmation
Setting the setback
temperature
Confirmation
4 - Programming
• Create your programme
Programming starts on day 1 at midnight. Press the
or
buttons
to create different Setback or Comfort periods (in 1/2 hour intervals).
There are 2 possibilities for confirming
your programme:
• Confirm and copy the programme
to the next day
Hold down the OK button for 3 seconds to
confirm and copy the programme you just
created to the next day.
• Confirm the programme
Press the OK button to confirm and go to
programming for the next day.
Turn the selector dial to the position marked
The default programme is a Comfort period from 6.00am to 11.00pm.
The return key is used to modify a programme by returning to a specific time slot
OR
1st time slot
Set one 1/2 hour
period in setback mode
Set one 1/2 hour
period in comfort mode
Days
Return
button
Confirmation
button
6h30
8h30
0h
0h
17h30
23h
Example: Comfort from 6.30am to
8.30 am and 5.30 pm to 11.00 pm
Press
up to 06:30
Press
up to 17:30
Press
up to 00:00
Press
up to 08:30
Press
up to 23:00
Copy and confirm,
or confirm
5 - Automatic mode
Turn the selector dial to the position marked
. Your thermostat will function according
to the programme.
NOTE:
By default, your unit will continuously display the set-point temperature. If you want to modify this
parameter, please refer to the CF02 menu of the “installation guide”, or contact your installer.
Current day
Time
Information
button
Request for
heat or cold
Room
temperature
Current
mode
Current day
programming
Absence
button
Timer
mode button
6 - Timer mode
This mode is used to choose a particular
mode for a given amount of time.
In AUTO mode, press on the button
• Press + or - to set the duration that you
want (between 30 minutes and 72 hours),
then on OK to confirm.
Example: Timer mode for 30 minutes.
• Press + or - to set the set-point temperature
that you want (from 5 to 30°C for heating
mode and from 18 to 35°C for cooling
mode), then on OK to confirm and start the
countdown.
Duration of timer mode
Cancel
Cancel Temperature
setting
Set-point
temperature
adjustment
Confirm
and begin
countdown
Setting the duration
Confirmation
Press on OK during Timer mode to modify
the settings.
To cancel the current Timer mode,
press on the button
Return to AUTO mode at the end of the countdown
• Carefully read these instructions prior to installation.
• Do not attempt to repair the unit yourself; an after-sales service is available.