Associate the buttons with the receiver, Associate the button with the receiver – Delta Dore RF 642 User Manual

Page 7

- 13 -

On the transmitter, press and hold the

button

down for approximately 5 seconds.
The button will light up, go out then light up again.
Release.

Check that the receiver’s LED is no longer flashing.

The transmitter

button is associated with the

receiver.

Associate the

buttons with the

receiver

On the receiver, press the button until the LED flashes
(~3 seconds). You now have two options.
Slow flashing: simple lighting mode
Quick flashing: pulse mode
Press the receiver button to switch from one rate of
flashing to the other. Select the slow flashing option.

On the transmitter, press and hold the

and

buttons down together for approximately 5 seconds.

The buttons will light up, go out, then light up again.
Release. Check that the receiver’s LED is no longer
flashing.
The transmitter buttons

and

are associated

with the receiver.

- 12 -

The simple lighting mode can be controlled by a TYXIA
transmitter (transmitter switch, key ring remote control,
etc.).

Associate the button

with the

receiver

Simple lighting mode with an associated

TYXIA transmitter

Off

Either is possible,

depending on the scenario.

Each function of the receiver can record up to a
maximum of 8 associations (buttons, transmitters, etc.).