Daktronics Rodeo Interface with Daktronics Matrix Displays - Manual (Page 13)

Venus 1500 Connection Methods 7
The Venus 1500 Real Time application relays the data from timing console and the DakStats
3000 Rodeo software to the internal RTD buffer of the display. This application must remain
open at all times to keep outputting RTD.
Note: If the Venus 1500 Shell does not have the Venus 1500 Real Time icon (Figure 6), first
make sure that the Venus 1500 Real Time software key (Daktronics part number 0A-1147-
0011) is plugged into a USB port on the computer. If it is plugged in and the icon is still not
showing up, the driver may need to be re-installed. Please contact Customer Support with
any questions.
1. Click the Venus 1500 Real Time icon (Figure 6).
2. In the Venus 1500 Real Time main window (Figure 7), double-click on Input 2
(Input 1 is reserved for data coming directly from the timing console).
3. In the Input Properties window (Figure 8), click Configure.
Figure 6: Venus 1500 Real Time Icon
Figure 7: Venus 1500 Real Time
Figure 8: Input Properties