Daktronics DakTennis Version 3 - Manual (Page 22)

18 Operation
Output Settings
MDP
Click the Settings button for the MDP output to adjust the
TNMC (Team Name Message Center) output formats as well
as the scoreboard Brightness as needed (Figure 21).
Note: On a TNMC, most lowercase letters display as a
narrower font. If a certain name will not fit on the
selected TNMC size, try using a combination of
uppercase and lowercase letters.
RTD – Matches
Click the Settings button for the RTD Match output to select
the Competition data to display (Dual 1, Dual 2, Dual 3, or
Custom). By default, Dual 1 is selected (Figure 22). To display
data for more than one competition at the same time, another
output port must be set up for each additional competition.
4.5 Competition Tabs
The Competition tabs (Figure 23) show all matches in the
competition independent of the court to which they are assigned.
There may be up to four Competition tabs open at once.
Figure 21: MDP Output Settings
Figure 22: RTD Match Settings
Figure 23: Competition Tab (Dual)