Columns, Data range location – Daktronics Data Manager (DDM) User Manual
Page 20

14
Operation
Columns
This configuration box sets the number of highlighted columns in the data field, as well as the
maximum number of characters for each piece of data in the column. Click the plus (+) and
minus (-) signs to expand or hide the options, respectively.
1. Click Columns, and then click the
button that appears to open the Header Editor
window (Figure 14).
2. Click Add to insert more columns, and click Remove to delete columns.
3. Select a maximum Size in characters for the information in each cell for the column.
Note: If information appears to be getting cut off on the display, make sure that the
Size is large enough to fit the whole piece of information. Resizing column width to
see longer information is not the same as changing the Size.
4. Enter a Title for the column. The Title will show up as the column header in the RTD.
5. Click Ok when finished.
Data Range Location
This configuration box sets the starting location of the headers on the spreadsheet (Figure 15).
Click the plus (+) and minus (-) signs to expand or hide the options, respectively. Be sure to
adjust this setting before entering data into the spreadsheet cells.
Figure 14: Header Editor Window
Figure 15: Data Range Location