Display sequence, Display sequence -7, Intensity xx – Daktronics DF-1030 User Manual
Page 51: Enter to set
Display Operation
5-7
LCD Screen
Action
INTENSITY XX
↓↑
ENTER TO SET
XX – Current intensity (1-16)
Max Intensity - 16
Press the up or down arrow key <
↑↓
> to modify
the current intensity of the display (Note: The
DataMaster must be connected to the display)
Press <
ENTER
> to accept this intensity. If the
manual dimming mode is selected, this will be
the new intensity for the display. If the
automatic dimming mode is selected, the
display will illuminate in full-bright mode, which
is the maximum intensity level.
Display Sequence
Once connected to the display with a j-box, radio, or modem, press <
DISPLAY
SEQUENCE
> to display the new sequence on the display. This button will also allow
for a preview of the new sequence on the LCD.