Daktronics DF-1030 - Manual (Page 48)

5-4 Display Operation
For more information about the Modem Settings submenu, refer to ED-13953:
DataMaster Modem Installation Manual. For additional information about the
Display Status or the Set Time submenus, refer to ED-13894: DataTime Radio
Installation Manual, ED-13894; that manual provides for complete details on
installation and setup for a bi-directional radio system.
Rate Display Controller Operation
The DataMaster 100, configured to the rate display option, defaults to showing the
current display settings on power up. The following text will be shown on the LCD.
LCD Screen Action
LINE PRICE
1
↓
$ DD.CC
TO MODIFY
1
↓
$ DD.CC
The display will toggle between these two
screens.
DD.CC = dollars and cents value shown on
line 1.
Press the up or down arrow keys < ↑↓ > to
scroll through the current setting for any of
the lines on the display.
Press the < ENTER/EDIT > key to modify any of
the line settings.
Modifying Price Line Settings
The rate price can be modified either by pressing the < EDIT > key during operation
(Refer to the Rate Display controller operation) or using the < MENU > key (refer to
the < MENU > key operation.)
Use the following key to identify the item to be edited.
L= Current line number to be edited
D.CC= Current dollars and cents value to edit
LCD Screen Action
EDIT LINE L
$DD.CC
Press any of the number keys to edit the price
value for this line.
Press < ENTER > to accept the new value or
press < CLEAR > to abort the changes.
Note: The flashing asterisk on the LCD shows
the current data being edited.
Press the down arrow key < ↓ > to modify the
next line, or press the < ↑↓ > keys to move to
the next item or the previous one on the list.