Example: ppp (modem) passive dialup through pstn – Q-See QSC26408 User Manual
Page 88
User Manual for Commercial Series Net DVR
Page
88
Total
121
login with remote PC dialup through PSTN.
Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone
number of remote PC.
Callback and Data Encryption: Only used when work mode is “PPP”. This option is not
currently available.
Confirm: Save parameters and return main menu.
Cancel: Abort modification and return main menu.
Example: PPP (Modem) passive dialup through PSTN
There are two Modems. One is connected to the DVR RS-232 port with DCE cable. The
other is connected with PC COM port.
Setup at DVR end
Step 1: RS232 setup: Setup baud rate, data bit, stop bit, parity and flow control. They must
be the same as those of modem connected with PC.
Step 2: Video setup In “Recording” menu, select the camera you want to transfer through
PSTN. If you set CIF resolution, we suggest you set frame rate as 1 FPS. If you set QCIF
resolution, the frame rate can be selected under 4FPS. You can adjust bit rate, resolution and frame
rate according to your needs.