Q-See QSC26408 - Manual (Page 68)

User Manual for Commercial Series Net DVR
Page
68 Total 121
 【↓】: Down-enlarge red panel;
 【↑】: Up-shrink red panel;
 【PTZ】: Set whole screen as motion area;
 【A】: Clear all motion areas;
 【ENTER】: Save and return to “Image Setup” menu;
 【ESC】: Cancel setup and return to “Image Setup” menu;
The motion detection area is displayed as follows:
Step 5: Motion alarm policy: Move “Active Frame” to the corresponding “Policy” button of
motion detection alarm, press
【ENTER】key to enter into “Motion Alarm Handle” menu:
Step 6: Motion alarm record channel setup: When a motion alarm happens, you can