Q-See QSC26408 - Manual (Page 32)

User Manual for Commercial Series Net DVR
Page
32 Total 121
PTZ control keys description
Direction control keys:
【↑】,【↓】,【←】,【→】;
ZOOM control keys:
【ZOOM+】,【ZOOM-】;
FOCUS control keys:
【FOCUS+】,【FOCUS-】;
IRIS control keys:
【IRIS+】,【IRIS-】;
Adjust preset keys:
【REC/SHOT】;
Auto control key:
【PLAY/AUTO】;
Wiper control key:
【WIPER/MENU】;
Light control key:
【LIGHT/F1】;
Auxiliary device control key:
【AUX/F2】
Adjust preset description
In PTZ control mode, press
【REC/SHOT】key, and press the preset number (three numeric
keys), DVR will adjust the corresponding preset number. Repeat pressing
【REC/SHOT】key, and
press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup. Current
firmware can support 128 preset number at most.
Start/Stop auto in PTZ control mode
In PTZ control mode, press
【PLAY/AUTO】key to start PTZ auto function. Press
【PLAY/AUTO】key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto
function.You must enter into PTZ control mode again, and press
【PLAY/AUTO】key to stop.
Exit PTZ control mode
Press
【ESC】or【ENTER】to exit and return to preview mode.