Q-See QSC26408 - Manual (Page 40)

User Manual for Commercial Series Net DVR
Page
40 Total 121
Step 2: Select the files that you want to backup
In the file list box, use
【↑】or【↓】keys to move the scroll bar. When the scroll bar stays at the
file you want to backup, press
【EDIT】key to select it. The symbol “” is the selection tag. You
can use the same method to select other files you want to backup. After finishing, you can do the
next step.
Step 3: Select backup device
Please select the backup device: USB flash memory, USB HDD, USB DVDRW/CDRW,
SATA DVDRW/CDRW, or SATA HDD.
Step 4: Start and finish backup
Move “Active Frame” to “Save” button and press
【ENTER】key to start backup.
When backup is started, corresponding message box will pop-up to indicate the result.
Backup video segment
You also can backup the image segments when the image is being playback. The steps are:
1) Enter into the interface of playback the files or playback by time;
2) Press
【EDIT】key to start selecting the current playback images, and press【EDIT】again
to stop selecting. This segment is selected;
3) You can repeat step 2 to select many segments. 30 segments can be selected in all;
4) After you select all segments, press
【ESC】key, a message window will pop-up. If you
press “Confirm” button, DVR will start to backup the selected segments. If you press
“Cancel” button, DVR will abort backup.