Q-See QSC26408 - Manual (Page 59)

User Manual for Commercial Series Net DVR
Page
59 Total 121
6.6 Video Parameters Setup
For different cameras and different backgrounds, in order to get the best video image, you
may need to adjust video parameters such as brightenss, saturation, contrast and hue, etc.
You can setup the cameras individually, and you can copy the video parameters of one
camera to any other cameras. Here are the setup steps:
Step 1: Enter into “Image Setup” menu:
Step 2: Select camera: Please use
【】【】keys to select one camera.
Step 3: Adjust brightness, contrast, saturation and hue: Move “Active Frame” to the
“Adjust” button on the right side of Brightness, Contrast, Saturation and Hue, press
【ENTER】
key, you will enter into the corresponding adjust interface. In the adjust interface, there is one
scroll bar at the bottom, you can use
【】 【】keys to adjust and the video image will be changed
at the same time. When you are satisfied with the real time video image, press
【ENTER】to return
“Image Setup” menu.
Step 4: You can copy the video parameters of the current camera to any other cameras. Or
you can repeat setp2 and step3 to adjust for any other camera.
After adjust, in “Image Setup” menu, press “Confirm” button to save parameters and make
them effective. Otherwise, perss “Cancel” button or
【ESC】key to abort modification.