Q-See QSC26408 User Manual
Page 104
User Manual for Commercial Series Net DVR
Page
104
Total
121
3.
Select “Users/rights” under “Security” menu item. The following dialog box will
pop-up.
4.
Create new user. Click “new user’. New user dialog pops up. Input user name “target”.
Click “OK”.
5.
In the password dialog box, also input password “target” in “New Password” and
“Verify Password” edit box. Click “OK” to save and exit the dialog box.
6.
In the “User/Rights Security” Dialog, select “User Name” as “target”. In “Home
Directory” edit box, input the path where the firmware file (digicap) is placed. Then press “Done”
to exit.
7. Next time, you do not need to setup again, just double click and open “wftpd32.exe” to
upgrade the DVR/DVS firmware.