Q-See QSC26408 - Manual (Page 36)

User Manual for Commercial Series Net DVR
Page
36 Total 121
Three kinds of playback mode
1. Search and playbck file: In the playback interface, you can select main channel, second
channel (2-ch playback), record type, time section. Move “Active Frame” to “Search” button and
press
【ENTER】key, DVR will search and list the matched files.
If the matched files are more than 8, you can use “Page No.” to select page (use numeric keys or
【↑】 【↓】keys to select page). In the file list box, use【↑】【↓】keys to move the scroll bar to the
file, press
【ENTER】key to playback the file. If the second channel is selected, these two channels
can be played back simultaneously
.
If DVR can not find the matched files, a failure dialog box will pop-up.
2. Playback by Time: In the playback interface, select main channel, second channel (2-ch
playback), record type and time section, move “Active Frame” to “Play” button, press
【ENTER】
key, DVR will start to playback based on time section.
3. Search by Card No and Playback file: In the playback interface, select main channel,
second channel (2-ch playback), record type, enable card No. search option (“”) and input the
card number, move “Active Frame” to “Search” button, press
【ENTER】key, DVR will search and
list the matched files. If the matched files are more than 8, you can use numeric keys or
【↑】【↓】
keys to select page. Use
【↑】 【 ↓ 】keys to move scroll bar to the file, press【ENTER】key to playback
the selected file. If DVR can not find any matched files, a message dialog box will pop-up.