Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser - Manual (Page 72)

TD020851-0MG
72
5.2.3 Managed Objects for Ethernet-like Interface Types
— From RFC 1643
Ethernet-like Interface MIB —‘dot3’ 1.3.6.1.2.1.10.7
5.2.3.1 Ethernet-like Statistics Group — ‘dot3StatsTable’ 1.3.6.1.2.1.10.7.2
oid = “1.3.6.1.2.1.10.7.2.1.1.dot3StatsIndex”
dot3StatsIndex: An index that identifies an interface, same value as ifIndex
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.2.dot3StatsIndex”
dot3StatsAlignmentErrors: The number of frames received on the interface that are
not an integral number of octets in length and do not pass the FCS check. This count is
incremented when the alignmentError status is returned by the MAC service to the LLC.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.3.dot3StatsIndex”
dot3StatsFCSErrors: The number of frames received on the interface that are not an
integral number of octets in length and do not pass the FCS check. This count is
incremented when the frameCheckError status is returned by the MAC service to the
LLC.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.4.dot3StatsIndex”
dot3StatsSingleCollisionFrames: The number of successfully transmitted frame on the
interface for which transmission is inhibited by one collision
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.5.dot3StatsIndex”
dot3StatsMultipleCollisionFrames: The number of successfully transmitted frame on
the interface for which transmission is inhibited by more than one collision
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.6.dot3StatsIndex”
dot3StatsSQETestErrors: The number of times that the SQE TEST ERROR message
is generated by the PLS sublayer for this interface. Returns 0.
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.7.dot3StatsIndex”
dot3StatsDeferredTransmissions: The number of frames for which the first
transmission attempt on the interface is delayed because the medium is busy
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.8.dot3StatsIndex”
dot3StatsLateCollisions: The number of times that a collisions is detected on the
interface later than 512 bit-times into the transmission of a packet
Access: read-only
oid = “1.3.6.1.2.1.10.7.2.1.9.dot3StatsIndex”
dot3StatsExcessiveCollisions: The number of frames for which transmission on the
interface fails due to excessive collisions
Access: read-only