4 ‘icmp’ group 1.3.6.1.2.1.5, 5 ‘tcp’ group 1.3.6.1.2.1.6, Icmp’ group 1.3.6.1.2.1.5 – Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser User Manual
Page 63: Tcp’ group 1.3.6.1.2.1.6

TD020851-0MG
63
oid = "1.3.6.1.2.1.4.20.1.4.< ipAdEntAddr >"
ipAdEntBcastAddr: The value of the least-significant bit in the IP broadcast address =
1 for Internet standard all-ones broadcast address
Access: read-only
oid = "1.3.6.1.2.1.4.20.1.5.< ipAdEntAddr >"
ipAdEntReasmMaxSize: The size of the largest IP datagram which this switch can re-
assemble from incoming IP fragments
Access: read-only
5.2.1.4 ‘ICMP’ group 1.3.6.1.2.1.5
oid = “1.3.6.1.2.1.5.1.0”
icmpInMsgs: The total number of ICMP messages which the switch received
Access: read-only
oid = “1.3.6.1.2.1.5.2.0”
icmpInErrors: The number of ICMP messages which the switch received but determined
as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)
Access: read-only
oid = “1.3.6.1.2.1.5.8.0”
icmpInEchos: The number of ICMP Echo (request) messages received
Access: read-only
oid = “1.3.6.1.2.1.5.9.0”
icmpInEchoReps: The number of ICMP Echo Reply messages received
Access: read-only
oid = “1.3.6.1.2.1.5.14.0”
icmpOutMsgs: The total number of ICMP messages which this switch attempted to send
Access: read-only
oid = “1.3.6.1.2.1.5.15.0”
icmpOutErrors: The number of ICMP messages which this switch did not send due to
problems discovered within ICMP
Access: read-only
5.2.1.5 ‘TCP’ group 1.3.6.1.2.1.6
oid = “1.3.6.1.2.1.6.10.0”
tcpInSegs: The total number of segments received, including those received in error
Access: read-only
oid = “1.3.6.1.2.1.6.11.0”
tcpOutSegs: The total number of segments sent, including those on current connections
but excluding those containing only retransmitted octets
Access: read-only
oid = “1.3.6.1.2.1.6.12.0”
tcpRetransSegs: The total number of segments retransmitted
Access: read-only