Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser - Manual (Page 65)

TD020851-0MG
65
oid = “1.3.6.1.2.1.11.9.0”
snmpInNoSuchNames: The total number of SNMP PDUs which were delivered to the
SNMP protocol switch and for which the value of the error-status field is ‘noSuchName'
Access: read-only
oid = “1.3.6.1.2.1.11.10.0”
snmpInBadValues: The total number of SNMP PDUs which were delivered to the
SNMP protocol switch and for which the value of the error-status field is ‘badValue'
Access: read-only
oid = “1.3.6.1.2.1.11.11.0”
snmpInReadOnlys: The total number valid SNMP PDUs which were delivered to the
SNMP protocol switch and for which the value of the error-status field is ‘readOnly'
Access: read-only
oid = “1.3.6.1.2.1.11.12.0”
snmpInGenErrs: The total number of SNMP PDUs which were delivered to the SNMP
protocol switch and for which the value of the error-status field is ‘genErr'
Access: read-only
oid = “1.3.6.1.2.1.11.13.0”
snmpInTotalReqVars: The total number of MIB objects which have been retrieved
successfully by the SNMP protocol switch as the result of receiving valid SNMP Get-
Request and Get-Next PDUs
Access: read-only
oid = “1.3.6.1.2.1.11.14.0”
snmpInTotalSetVars: The total number of MIB objects that have been altered successfully
by the SNMP protocol switch as the result of receiving valid SNMP Set-Request PDUs
Access: read-only
oid = “1.3.6.1.2.1.11.15.0”
snmpInGetRequests: The total number of SNMP Get-Request PDUs that have been
accepted and processed by the SNMP protocol switch
Access: read-only
oid = “1.3.6.1.2.1.11.16.0”
snmpInGetNexts: The total number of SNMP Get-Next PDUs that have been accepted
and processed by the SNMP protocol switch
Access: read-only
oid = “1.3.6.1.2.1.11.17.0”
snmpInSetRequests: The total number of SNMP Set-Request PDUs that have been
accepted and processed by the SNMP protocol switch
Access: read-only
oid = “1.3.6.1.2.1.11.18.0”
snmpInGetResponses: The total number of SNMP Get-Response PDUs that have
been accepted and processed by the SNMP protocol switch
Access: read-only
oid = “1.3.6.1.2.1.11.19.0”
snmpInTraps: The total number of SNMP Trap PDUs that have been accepted and
processed by the SNMP protocol switch
Access: read-only