3 on-screen help, On-screen help, N figure 6 – Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser User Manual
Page 11
TD020851-0MG
11
By default, the IP Address configuration method is “Fixed”. Either leave it as is or
choose the “DHCP” method of changing the IP address. If the “DHCP” option is
selected, it will only take effect after the switch is connected to a network which contains
a DHCP server. At that point, you must ascertain the IP Address assigned by the
DHCP server.
If your switch has no Console Port, you can find the assigned IP
address with the procedure in Appendix 5.1.
If your switch has a Console Port, you
can access it via a serial cable to learn the IP Address — as described in the Software
Manual for Console Access available at:
Figure 6 — The Default IP Address
After the switch has been given its initial configuration, it will be ready for use in the full
original LAN. The temporary LAN should then be dismantled and the PC re-configured
to restore its original IP address.
4.1.3 On-Screen Help
There are many configuration screens. The upper-right portion of each screen contains
a context-sensitive
Help option. Clicking this option launches another browser window
which contains helpful information about the current screen and which pertains to a
certain product series. The example of Figure 7 pertains to the EISX_M Series.
Figure 7 — Help Window