Contemporary Control Systems Compact Managed Switches Software Manual for Web Browser - Manual (Page 60)

TD020851-0MG
60
5.2.1.2 ‘Interfaces’ group 1.3.6.1.2.1.2
oid = "1.3.6.1.2.1.2.1.0"
ifNumber: The number of network interfaces (regardless of their current state) present
on this system
Access: read-only
5.2.1.2.1 The Interfaces Table — ‘ifTable’ 1.3.6.1.2.1.2.2
oid = "1.3.6.1.2.1.2.2.1.1.ifIndex"
ifIndex: A unique value, greater than zero, for each interface
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.2.ifIndex"
ifDescr: Interface string contains information about the interface
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.3.ifIndex"
ifType: Interface type = 6 if Ethernet
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.4.ifIndex"
ifMtu: The size of the largest datagram that can be sent/received
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.5.ifIndex"
ifSpeed: Interface speed = 100000000 for 100Base-TX
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.6.ifIndex"
ifPhysAddress: Ethernet (MAC) address (only used for designated management port
on a switch)
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.7.ifIndex"
ifAdminStatus: The desired state of the interface
1 = up (ready to pass packets)
2 = down
3 = testing
Access: read-write
oid = "1.3.6.1.2.1.2.2.1.8.ifIndex"
ifOperStatus: The current operational state of the interface
1 = up (ready to pass packets)
2 = down
3 = testing
4 = unknown
5 = dormant
Access: read-only