Cloud Electronics DCM1 - Manual (Page 72)

DCM1 & DCM1e Installation and User Guide V1.0 72
Cloud DCM1 Configuration Notes – to be left with User
Complete this form when installation is complete and leave with User.
MUSIC SOURCES - NAMES
INPUT SOURCE
1
2
3
4
5
6
7
8
ZONES - NAMES
ZONE LOCATION
1
2
3
4
5
6
7
8
GROUP SETUP
GROUP LOCATION & FUNCTION
CONNECTS ZONES (tick)
1 2 3 4 5 6 7 8
1
2
3
4
To Change the Music Source in a Zone
 If top line of display does not show Select
Input
, press MUSIC button.
 Press the button (1 to 8) which corresponds to the
Zone.
 Turn the knob until the bottom line of the display
shows the music source required.
To alter the Music Volume in a Zone
 If top line of display does not show Select
Input
, press MUSIC button.
 Press the NEXT FUNCTION button so that the top
line of the display shows “Level”
 Press the button (1 to 8) which corresponds to the
Zone.
 Adjust the volume in the Zone with the knob.
To Enable/Disable a Group of Zones
 Press the GROUPS button
 Turn the knob until the required Zone Group is
displayed on the top line
 Press the knob in to enable (or disable) the Group.