BSS Audio FDS-334T Owner's Manual User Manual
Page 54
5 4
Inputs:
2 channels
Maximum level +20dBu, 10k
W
impedance,
Pin 2 +, electronically balanced.
Outputs:
6 channels (FDS-336T), 4 Channels (FDS-334T)
Maximum level +20dBu, into 600
W
impedance
Pin 2 +, electronically balanced.
Output Impedance:
47 Ohms
Dynamic Range:
>108dB
Frequency Response:
20Hz - 20kHz <+/- 0.5dB
Total Harmonic Distortion:
<0.01%, 20 Hz - 20 kHz, @+10dBu
Audio Sample Rate:
48 kHz
Configuration:
Stereo 2 way and 3 way(FDS-336T), Mono 4 way, Mono 5, 6
way(FDS-336T), any combination of 2 inputs to up to six
outputs with individual passbands.
Crossover Slopes:
Bessel 12 & 24dB/Octave, Linkwitz-Riley 12, 24 or 48dB/
Octave, Butterworth 6, 12, 18, 24 or 48dB/Octave,
Whiseworks NTM 36 or 52dB/Octave.
Limiters:
Mid band limiters with threshold of -10 to +20dBu
Assignable Equalization:
Up to 38 bands of EQ, dependent upon used crossovers slopes
High and Low shelving at 6dB or 12dB/Octave or fully
parametric with bandwidth of 0.05 to 3.0 octaves.
Frequency range, 15Hz to 16kHz.
Amplitude of +/- 15dB in 0.5 dB steps.
Delay Time:
635.417ms maximum delay on each input to output path.
Delay Time Resolution:
21µs steps.
Delay Units:
Milliseconds, metres, feet or frames per second.
Front Panel Controls:
Programming keys:
UTILS, STORE/ENTER, RECALL.
Input selectors, A, B and SUM.
Mute, edit selection and trim controls on each Output.
2 x navigation controls.
Metering:
Output level LED meters
OVER, LIMIT, -3, -6, -12 and -20dB below threshold, SIG
Input level LED meters
SIG present, -3, 0dBu, +3, +6, +12, and CLIP.
Display:
2 x 16 character backlit LCD
Memory:
60 User Programs stored in flash memory.
Dimensions (HxWxD):
44.4mm x 483mm x 203mm (1.75 x 19 x 8)
Net Weight:
2.8 kg (6.2 lbs)
Shipping Weight:
4.5 kg (9.9 lbs)
Safety Agency Approvals:
CE, ETL
Power Requirements:
100-240 Volts 50/60Hz
Specifications