BSS Audio FDS-334T Owner's Manual User Manual
Page 24

2 4
LCR 2 way mode (FDS-336T only)
When using a derived centre cluster feed such as in LCR (Left, Centre, Right) installation, the
configuration can be changed to a 3 channel 2 way configuration, where the center channel is a
sum of A and B.
Outputs 1 and 4 are routed from Input A.
Outputs 3 and 6 are routed from Input B.
Outputs 2 and 5 will be routed from Input sum A+B.
All delay linking defaults to off.
Stereo Link will be switched on.
Band Names will be set to Low and High.
Utilities
Configuration
A 3 Channel 2 Way system
This manual is related to the following products: