BSS Audio FDS-334T Owner's Manual User Manual
Page 10
1 0
FDS-334T/336T Minidrive Features
Active crossover filters with up to 52dB/Octave slopes to divide the audio spectrum into
separate passbands for each transducer. Up to six Outputs (336T) or four Outputs (334T)
can be derived from either of the two Inputs or a sum of both.
Up to thirty eight bands of parametric or shelving equalization for smoothing system
frequency response over the entire bandwidth.
60 storage locations for user Programs.
Up to 630 ms signal delay per signal path (in 21 µs steps) on Inputs and Outputs for delay
towers and clusters as well as transducer alignment.
Output limiters, with adjustable thresholds and automatic attack and release settings
based on crossover frequency, protect speakers from overload damage whilst retaining full
musical dynamics.
Front panel controls for channel muting, programming and level information.
Security Lock Out modes for protecting and hiding Program settings.
Delay units representable in milliseconds, metres, feet, and frames per second.
Polarity reversal on each Output.
Digital gain adjustment from -15 to +15 dB.
MIDI system exclusive (sysex) dump capabilities to save and transfer Programs between
units and to archive settings.
Introduction