BSS Audio FDS-334T Owner's Manual - Manual (Page 27)

2 7
Delay Units
Pressing the Utilities button at any time from a Delay screen
in any of the Input or Output modes will select the Delay
Units screen.
Delay units can be changed for the specific application to display in:
Milliseconds (ms)
Frames per second (24, 25 & 30fps)
Feet/inches (ft ', ins ")
Metres (m)
Use the < and > navipad keys or rotary encoder to select the preferred measurement units.
Returning to the delay parameter (by pressing the associated Input or Output button) will then
allow the delay value to be viewed and adjusted in the selected units.
Utilities Delay Units
Utilities Crossover Mode
Crossover Mode
This Utility allows the crossover slopes of the associated
bands to be linked together for ease of setting. For example,
when in ‘Both’ mode changing the frequency of the Hi slope
of an output channel set up as say ‘low’ band will also
change the frequency of the Lo slope in the adjacent ‘Mid’
band output channel. The bands do not necessarily need to
actually crossover at the same frequency as an offset can be
maintained between them.
Edge
‘Edge’ mode keeps all the crossover slopes separately
adjustable. This mode is useful in initial system set up to
tune a driver/cabinet’s individual response.
Both