BSS Audio FDS-334T Owner's Manual User Manual
Page 38
3 8
Delay
Output channel Delay is adjustable from 0 - 635ms in 21µs steps. At no time can there be more
than 635ms of delay on any Input to Output path. The < and > navipad keys select delay time
values in 21µs steps whilst the rotary encoder can be used to select larger delays quickly.
Pressing the Utilities button at any time from a Delay screen in an Output mode will select the
Delay Units screen. Delay units can be changed for the specific application to display in:
Milliseconds (ms)
Frames per second (24, 25 & 30fps)
Feet/inches (ft , ins )
Metres (m)
Use the < and > navipad keys or rotary encoder to select the preferred measurement units.
Returning to the delay parameter, by pressing the associated Output button, recalculates the
delay values for all displays and remembers this setting until it is either changed again or stored
with a Program.
Outputs
Delay Linking
Delay Linking
This is used to maintain offsets between various channels. Typical uses include setting individual
transducer delay offsets for optimum performance and then linking them, i.e. driver alignment. If
either linked channels delay is changed, the other linked channel(s) will follow and maintain the
offset. Normally, the transducer delays are set first, then any overall delay for cluster alignment or
delay tower set-up second. The following table shows the linkable channels in each mode.
Delay Linking Relationships for FDS-336T
Outputs
Delay
?ED @ED
=_ ^_
"3X Q^^ U\#GQi
#3X Q^^ U\"GQi
!
"
#
$
"
#
$
%
#
$
%
&
$
%
&
>_ ^U
%
&
>_ ^U
>_ ^U
&
>_ ^U
>_ ^U
>_ ^U