BSS Audio FDS-334T Owner's Manual - Manual (Page 30)

3 0
Utilities Security Lock Outs
Confirming the Lock selection
When all the desired parameters are locked, confirm the lock set up process with the STORE/
ENTER key, (as indicated when first entering this mode). The unit now returns to the password
screen with the current password displayed. This password can be changed if required by using
the < and > keys to move the cursor and the up and down keys or rotary encoder to change the
letters.
Pressing STORE/ENTER stores the password and returns the display to the Utilities menu.
The unit will now not display any locked parameters. If all parameters for a particular Input or
Output channel have been locked the selection button for that channel will no longer display
any associated screens as there are no parameters available to adjust.
Unlocked parameters display as normal and can still be edited although the associated Program
cannot be stored back into its original locked location and must be saved to a new user
memory. In order to free up the memory location for further use the locked Program would
have to be deleted, using the Delete Prog facility in the Utilities .
The screen above shows a Program that has both been OEM locked, (indicated by the diamond
symbol), and that unlocked parameters have been edited, (indicated by the asterisk). The
Program edited symbol ‘*’ is not displayed in the Lock setup mode.
To return to the Lock setup mode to revise the selection of locked parameters or to turn the locks
off altogether, select the Utilities mode and locate the lock screen. Press the < navipad key or
turn the rotary encoder anti-clockwise to display the password screen. Enter the password and
press STORE/ENTER, the lock will now be switched off.
Owner Lock
This second level of security operates in exactly the same way as OEM Lock except that where
‘OEM’ was displayed there is now the word ‘Own’ and the diamond icon is replaced by a
padlock, see above left. It is possible to use both these modes in conjunction in order to give
particular access to some parameters and not others. In this case both the padlock and the
diamond symbols are displayed in a single icon, see above right. The default password for the
Owner lock is “MINI”.