BSS Audio FDS-334T Owner's Manual User Manual
Page 32
3 2
MIDI Operation
MIDI Channel Number (1-16)
MIDI is used to transmit and receive Program changes and to transmit system exclusive dump
data between units. Use the < and > keys or rotary encoder to adjust the channel number from
1 to 16. Both sending and receiving equipment needs to be set to the same MIDI channel to
communicate correctly.
MIDI Mode (OFF, PROGRAM, MASTER, THRU, PC PORT)
This mode sets the type of information the FDS-334T/336T transmits on its MIDI out socket, and
is dependent on the use of the FDS-334T/336T in the system. The possible selections are:
OFF
No MIDI messages, except systems exclusive dumps, are transmitted.
PROGRAM (Prog)
Enables the unit to transmit MIDI program changes.
MASTER
Enables transmission of all control changes to other devices on the same MIDI channel - for
example to run two FDS-334T/336Ts in parallel for stereo applications.
THRU
Allows the throughput of data received at the MIDI in socket to the MIDI out, i.e. a soft thru with
merge from input, (as required by the BSS MIDI network used in the control systems).
Utilities
MIDI Operation