BSS Audio FDS-334T Owner's Manual - Manual (Page 23)

2 3
Utilities Configuration
2 Channel x 3 way mode (FDS-336T only)
• Outputs 1,3 and 5 are routed from Input A.
• Outputs 2, 4 and 6 are routed from Input B.
• All delay linking defaults to off.
• Stereo Link will be switched on.
• Band Names will be set to 1 ‘Low’, 2 ‘Mid’, 3 ‘High’, 4 ‘Low’, 5 ‘Mid’, 6 ‘High’ for Out-
puts 1 - 6 respectively. The Lo and Hi crossover frequencies are set to the following
default values:
If the FDS-336T is used for a stereo 2 way only system, Outputs 3-6 would be used with Low (3-
4) and High (5-6). This allows subwoofers to be added later on Outputs 1 and 2 without rewir-
ing existing systems.
A 2 Channel 3 Way system