BSS Audio FDS-334T Owner's Manual - Manual (Page 15)

1 5
Front Panel Navigation Control
The Navipad
To the left of the display screen there is a four way rocker selector
switch. This enables navigation through the various screens and to
both select a parameter to adjust (up/down) and to fine adjust the
value of the currently selected parameter (< and >). Where the param-
eter is non-numeric these keys scroll through a list of options.
The Navipad
The Rotary Encoder
To the right of the display screen there is a continuous rotary encoder
that, when turned, changes the values in the value area of the screen.
If this control is pushed in it will also step through the Inputs, Outputs
and Utility modes. If held down and turned it will also enable fast
switching through the avaliable modes.
The Rotary Encoder
In general navigate around the programming functions of the Minidrive by pressing the required
mode button (UTILS for Utilities functions, INPUT SELECT buttons or push an Output trim).
Then use either of the two main controllers to select and edit the various screens. In this way a
great deal of operational flexibility is achieved.
Navigation Control