Programming – Beisler 2211-5 User Manual
Page 88
Short Seam Automat 2211-5 Working Instructions
- D 88 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.7 List of global parameters
No.
Programmable global parameters (F2)
26
TILL SCISSORS CLOSED:
Time until scissors close / time interval
27
DURATION SCISSORS CUTS:
Cutting action of scissors / duration
28
TILL FABRIC CLAMP OPEN:
After cutting action, time until clamps opens / time interval
29
TILL SWING RETAINER DWN:
Lower swing retainer after seem has been sewn
30
TILL RETAINER SWINGS:
Swing retainer after retainer has been lowered
31
DUR. OF PULLING RETAINER:
Time during which the retainer pulls
32
BLOW OUT THE PART ....:
Blow off sewing piece / duration
33
CLAMP MOVES TO STACKER:
Time until moving begins / time interval
34
STACKER STAMP OPEN:
Distance how long the stamps will transport the sewing piece / traverse part
35
THREAD CATCH. "UP" POS:
Thread lever in top position / duration
36
SWITCH ON POS.OF TRIMM.:
Switch-on position for thread cutting: Input value 01-255
37
TRIMMING SPEED ......:
Speed during thread cutting
38
DURATION OF TRIMMING:
ON duration for thread cutting
39
THREAD CATCH.TURNS BACK:
Thread lever reversing angle
40
PROCESS IN STEPS .....:
Gradual operation