Beisler 2211-5 - Manual (Page 57)

- C 57 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
Fig. 20
Fig. 20
C.5.5 Machine set-up
Folder to pick-up plate alignment:
To ensure that the folder can pick up the left slash selvage
evenly, the folder must lie evenly on the pick-up plate along
its entire length when it is lowered.
Pick-up plate inclination adjustment:
1. Fig. 20: Fasten pick-up plate by rotating handwheel 4
completely to minus range.
2. Move folder 2 to pick-up plate 3 using input/output
control functions:
• Move folder to right.
• Lower folder.
3. Adjust pick-up plate inclination so that the folder lies
absolutely evenly on the pick-up plate by loosening the
two retaining screws 7 of the pick-up plate bracket
5 on the worktable underside and rotate the bracket
at the holder 6.
4. Tighten retaining screws.
5. Readjust folder rail 2. Slightly loosen retaining screws
1 and depress folder rail evenly onto pick-up plate.
6. Tighten retaining screws 1.