Beisler 2211-5 - Manual (Page 33)

- B 33 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
B.3
Operation
B.3.10 Controlling machine cycle
Fig. 25: The complete process of the sewing programs
is controlled by using the two footswitches.
1 Footswitch for machine operation
2 Footswitch for slash selvage clamp
Each sewing program offers several alternatives (modes)
for controlling the process.
The sewing programs:
•
M 01 with seam 01 ("Crimping over left slash selva-
ge and sew onto left trouser component") and
• M 03 with seam 19 ("Right slash selvage for ladies'
trousers."),
are controlled by using both footswitches.
•
The footswitch for the slash selvage clamp 2 closes
the slash selvage clamp after the slash selvage has
been inserted,
• The footswitch for machine operation 1 controls the
entire subsequent process of the sewing programm.
The sewing programs:
•
M 01 with seam 02 ("Sewing right slash selvage to
right trousers component")
• M 02 with seam 11,12 ("Right and left side pocket"),
• M 03 with seam 20 ("Left slash selvage for ladies' trou-
sers")
are controlled exclusively by using the footswitch for ma-
chine operation 1.
The sewing program:
•
M 0 with seam 03 ("Test seam")
is also controlled by using the footswitch for machine ope-
ration 2.
Fig. 25
Fig. 25