Beisler 2111-4 - Manual (Page 74)

Short Seam Automat 2110-4 / 2111-4 Workinging Instructions
- D 74 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.3 Service menu level 1
Manual winding:
This function is used to wind thread from the thread spool
to the top thread spool. To start the function:
• Press
key.
@
• Press
key.
• To exit, press any key.
NOTE - Remove top thread!
The top thread must be removed up to the thread lever
to protect the top thread and the bottom thread from being
entangled.
Selecting machine control inputs / outputs:
This menu is used for troubleshooting and for a manual
testing of machine operation settings.
The outputs (OUT) can be selected and tested separately.
The corresponding inputs (INP) are displayed for an ac-
tive output. Additionally, the selected output can be swit-
ched intermittently.
Activated inputs/outputs are marked with highlighted num-
bers.
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
NOTE - Machine movements!
If outputs are activated, the machine performs the corre-
sponding functions. Before activating the outputs, remove
all unnecessary objects within the operating range of the
machine.
Select output:
• Press key.
7
• Press
key.
Select number line:
• Press
# or $ key.
Mark output number by moving the corresponding func-
tion number using the cursor. The cursor now has the
shape of an arrow.
• Press
0 or / key.
Activate output:
• Press
% key.
The function number is highlighted in black. The output
is active.
Deactivate output:
• Press % key.
Switch output to intermittent operation:
• Mark function number using cursor.
• Press
% key for approx 3 seconds.
The function number is highlighted in black and flashes.
The output is active intermittently.
Switch off intermittent operation of output:
• Press % key.
The function number is highlighted in black again. The out-
put is still active.
Deactivate output:
• Press
% key.