Beisler 2111-4 - Manual (Page 34)

Short Seam Automat 2110-4 / 2111-4 Working Instructions
- C 34 -
Beisler Automated Sewing Equipment
C.4
Operation and shut-down
C.4.1 Working with the machine
Factory settings:
The machine has a factory-programmed standard program
(M 01) with six seams (01, 02, 03, 04, 05, 06). The six
seams differ in their control functions (see Section D.2.1,
Program control layout).
This sewing program is so powerful that it can be used for
production.
It is furthermore perfectly suited for training operating per-
sonnel and can be used as a template for programming
customer-specific sewing programs.
For details about the programming of sewing programs,
please refer to Section D of the working instructions.
C.4.2 Machine shut-down
When the machine is to be shut down, it must be discon-
nected from all supply sources.
Disconnecting the machine from the power supply
system:
1. Turn machine off using main switch. Move switch to
position "0".
2. Remove power plug from socket and protect it against
accidental reconnection.
Disconnecting the machine from the compressed air
supply system:
1. Shut off on-site compressed air.
2. Remove compressed air hose plug from terminal unit.
NOTE - Dust-proof protection!
If the machine is to be shut down for an extended period
of time, it should be covered with a plastic tarpaulin.