Beisler 2111-4 - Manual (Page 36)

Short Seam Automat 2110-4 / 2111-4 Working Instructions
- C 36 -
Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.3 Service
The following service works must be carried out in weekly
intervals.
Oiling the clamp rail:
1. Disconnect machine from power supply.
2. Wipe clamp rails clean using a soft, oil-saturated cloth.
The scope of delivery comprises 0.25 l of oil. When this
oil is used up, you can order the special machine oil
for service from the manufacturer or supplier of the ma-
chine.
Emptying the water separator:
1. Disconnect machine from power supply.
2. Drain water at pressure reducer water separator into
suited container.
Press button
1 at pressure reducer collector and keep
pressed until all the water has been drained.
NOTE - Sewing head!
For information about service of the sewing head, plea-
se refer to the working instructions of the sewing head.
Fig. 4
Fig. 4
1