Beisler 2111-4 - Manual (Page 46)

Short Seam Automat 2110-4 / 2111-4 Working Instructions
- C 46 -
Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.5 Machine set-up
Folder bar to folder clamp alignment:
To ensure that the folder can crimp over the pocket edge
evenly, the folder clamp
1 must pe positioned centrically
above the folder bar
2.
Folder bar adjustment:
1. Fig. 17: Fasten pick-up plate by rotating handwheel
3
completely to minus range.
Loosen retaining screw
4 of folder bar bracket at the
worktable underside and reposition bracket
5.
2. Tighten retaining screw.
Automatic label feed system positioning:
The position of the automatic label feed system at the in-
serting station can be changed by repositioning the bracket
of the automatic label feed system on the guide bar.
1. Fig. 18: Loosen bracket retaining screw
1 and repo-
sition bracket
3 on guide bar 2.
2. Tighten retaining screw.
Fig. 17/18
Fig. 17
Fig. 18
4
5
2
1
1
3
2
4
1 2
3