BECKHOFF AM3000 - Manual (Page 26)

8 Electrical installation Drive Technology
26 Version: 1.5 AM3000 / AM3500
Colour code for signal
pairs
8 pairs
1 st pair brown and white
2 nd pair green and yellow
3 rd pair grey and pink
4 th pair red and blue
5 th pair black and violet
6 th pair grey/pink and red/blue
7 th pair white/green and brown/green
8 th pair white/yellow and yellow/brown
Electrical specifications
Test conditions 20 °C
Test voltage
(conductor/conductor -
conductor/shielding)
Requirement
1500 VDC
undamaged insulation
Operating voltage ≤ 30 V
Conductor material
Conductor resistance
2 x 0.5 mm², tinned copper 19 x 0.18 mm
≤ 40 Ohm / km
Insulation resistance min. 2500 MOhm x km
Capacitance:
Power
Signals
max. 100 pF / m
max. 120 pF / m
8.2.2 AX2000 and AX2500
All cables are specified for flexible routing. They enable highly dynamic operation and are UL-listed.
Motor cable with signal line
Specification AX2000
4 x 1.5 mm 2 + 2 x 1 mm 2
AX2500
4 x 1 mm 2 + 2 x 1 mm 2
General data
Min. bending radius 118 mm 115 mm
Weight 185 kg / km 155 kg / km
Overall diameter 10.6 mm ± 4 % 10 mm ± 4 %
Max. velocity 120 m / min
Max. acceleration 4 m / s 2
Max. no. of cycles 10 million
Max. tensile load
static / dynamic
50 / 20 N / mm 2
Operating temperature 0 to 80 °C
Oil resistance “VDE 0472 Part 803 B”; “VDE 0282 Part 10”;
“UL 1581”
Sheath
Material PUR according to the UL standard
Shielding tinned copper braid, optical cover ≥ 85%
Colour RAL 2003 (orange)
Power leads 4 x 1.5 mm 2 4 x 1 mm 2
Conductor material blank copper (DIN EN 60228; VDE 0295; IEC
60228)
Insulation polyolefin polymer according to the
UL standard
Signal leads 2 x 1 mm 2
Conductor material blank copper (DIN EN 60228; VDE 0295; IEC
60228)
Insulation polyolefin polymer according to the
UL standard
Shielding tinned copper sheath, optical cover ≥ 85%
Electrical specifications