BECKHOFF AM3000 - Manual (Page 22)

8 Electrical installation Drive Technology
22 Version: 1.5 AM3000 / AM3500
8.2 Connection of motors with pre-assembled cables
Beckhoff offers preassembled motor and feedback cables for safe, faster and flawless installation of the
motors. Beckhoff cables have been tested with regard to the materials, shielding and connectors used. They
ensure proper functioning and compliance with statutory regulations such as EMC, UL etc. The use of other
cables may lead to unexpected interference and invalidate the warranty.
• Carry out the wiring in accordance with the valid standards and regulations.
• Only use our preassembled shielded cables for the power and feedback connections.
• Connect up the shielding according to the wiring diagrams in sections 8.3 to 8.6. Incorrectly installed
shielding inevitably leads to EMC interference.
All available cable types are listed below. Should you require additional information please contact our support.
8.2.1 AX5000
All cables are UL-listed.
8.2.1.1 Cables for fixed installation
Motor cable with signal line
Specification 4 x 1.5 mm 2 + 2 x (2 x 0.75 mm 2 )
General data
Weight kg / km
Min. bending radius 203 mm
Overall diameter 11.3 mm +/- 4%
Max. velocity 180 m/min
Max. acceleration 5 m/s 2
Max. no. of cycles 50.000
Max. tensile load 20 N/mm 2
Operating temperature -10 to 80 °C
Standards and features
UL AWM listed 80 °C – 1000 V
CSA AWM listed 75 °C – 1000 V
VDE (U
0
/ U) 0.6/1 kV
Flame resistance DIN EN 50265-2-1
Oil resistance UL 1581
Silicone-free yes
CFC-free yes
Halogen-free no
Sheath
Material PVC according to UL AWM & CSA AWM
Shielding tinned copper braid, optical cover ≥ 85%
Separator Polyester strap
Colour RAL 2003 (orange)
Power leads 4 x 1.5 mm 2
Conductor material blank copper cl.5 (DIN EN 60228; VDE 0295; IEC
60228)
Insulation TEO Flexene ® polymer compound, compliant
with UL AWM & CSA AWM
Colour code black (1 -3) + green/yellow
Signal leads 2 x (2 x 0.75 mm 2 )
Conductor material blank copper cl. 5 (DIN EN 60228; VDE 0295; IEC
60228)
Insulation TEO Flexene ® polymer compound, compliant
with UL AWM & CSA AWM
Structure pair-wise twisted
Shielding per pair tinned copper sheath, optical cover ≥ 85%
Separator fleece tape
Colour code for signal pairs 2 pairs