BECKHOFF AM3000 - Manual (Page 24)

8 Electrical installation Drive Technology
24 Version: 1.5 AM3000 / AM3500
6 th pair grey/pink and red/blue
7 th pair white/green and brown/green
8 th pair white/yellow and yellow/brown
Electrical specifications
Test conditions 20 °C
Test voltage
(conductor/conductor -
conductor/shielding)
Requirement
1500 VDC
undamaged insulation
Operating voltage ≤ 30 V
Conductor material
Conductor resistance
2 x 0.5 mm², tinned copper 19 x 0.18 mm
0.5 mm 2 ≤ 40 Ohm / km
Insulation resistance min. 2500 MOhm x km
Capacitance:
Power
Signals
max. 100 pF / m
max. 120 pF / m
8.2.1.2 Cables for flexible installation / highly dynamic operation
Motor cable with signal line
Specification 4 x 1.5 mm 2 + 2 x (2 x 0.75 mm 2 )
General data
Weight kg / km
Min. bending radius 85 mm
Overall diameter 12.2 mm E 4mm
Max. velocity 240 m / min
Max. acceleration 30 m / s 2
Max. no. of cycles 10 million
max. horizontal length 20 m
max. vertical length 5 m
Max. tensile load 20 N / mm 2
Operating temperature -10 to 80 °C
Standards and features
UL AWM listed 80 °C – 1000 V
CSA AWM listed 75 °C – 1000 V
VDE (U
0
/ U) 0.6 / 1 kV
Flame resistance DIN EN 50265-2-1
Oil resistance UL 1581
Silicone-free yes
CFC-free yes
Halogen-free yes
Sheath
Material TMPU, halogen-free, compliant with UL AWM &
CSA AWM
Shielding tinned copper braid, optical cover ≥ 85%
Separator Polyester strap
Colour RAL 2003 (orange)
Power leads 4 x 1.5 mm 2
Conductor material blank copper cl.5 (DIN EN 60228; VDE 0295; IEC
60228)
Insulation TEO Flexene ® polymer compound, compliant
with UL AWM & CSA AWM
Colour code black (1 -3) + green/yellow
Signal leads 2 x (2 x 0.75 mm 2 )
Conductor material blank copper cl. 5 (DIN EN 60228; VDE 0295; IEC
60228)
Insulation TEO Flexene ® polymer compound, compliant
with UL AWM & CSA AWM