Basler Electric BE1-851 Modbus Protocol - Manual (Page 59)

9289900992 Rev F BE1-851 Modbus
™ Protocol
3-21
47437 Today's Peak Demand Timestamp - Day INT
47442 Today's Peak Demand Timestamp - Day INT
47447 Today's Peak Demand Timestamp - Day INT
47452 Today's Peak Demand Timestamp - Day INT
47457 Today's Peak Demand Timestamp - Day INT
Read only:
Any value (days since 01/01/1984).
47438-39
Today's Peak Demand Timestamp - Millisecond LI
47443-44 Today's Peak Demand Timestamp - Millisecond LI
47448-49 Today's Peak Demand Timestamp - Millisecond LI
47453-54 Today's Peak Demand Timestamp - Millisecond LI
47458-59 Today's Peak Demand Timestamp - Millisecond LI
Read only:
0 to 86,399,999 milliseconds.
47460-61
Peak Since Reset Demand Current - Phase A FP
47465-66 Peak Since Reset Demand Current - Phase B FP
47470-71 Peak Since Reset Demand Current - Phase C FP
47475-76 Peak Since Reset Demand Current - Neutral FP
47480-81 Peak Since Reset Demand Current - Neg-Seq FP
Read only:
Any value (amps)
47462
Peak Since Reset Demand Timestamp - Day INT
47467 Peak Since Reset Demand Timestamp - Day INT
47472 Peak Since Reset Demand Timestamp - Day INT
47477 Peak Since Reset Demand Timestamp - Day INT
47482 Peak Since Reset Demand Timestamp - Day INT
Read only:
Any value (days since 01/01/1984).
47463-64 Peak Since Reset Demand Timestamp - Millisecond LI
47468-69 Peak Since Reset Demand Timestamp - Millisecond LI
47473-74 Peak Since Reset Demand Timestamp - Millisecond LI
47478-79 Peak Since Reset Demand Timestamp - Millisecond LI
47483-84 Peak Since Reset Demand Timestamp - Millisecond LI
47486
Reset Logic Alarm Information SI
47487 Reset Major Alarm Information SI
47488 Reset Minor Alarm Information SI
47489 Reset Relay Alarm Information SI
47491 Clear Fault Log SI
47492 Trigger Fault Record SI
47493 Clear Events Report SI
Read:
0
Write:
Any value will perform reset / trigger / clear.
47512
Fault Indicator SI
Read only:
Most recent fault number (1 - 255)
47513
Fault Template Status SI
Read only:
0: Template not valid for current Fault Selection
(Refer to Register 40038). All FLT template values will read 0.
1 to 255: Valid user selected fault number.