Aviosys 9212 Delux - Manual (Page 31)

- 30 -
As received new firmware, user can gain more functions for IP Power 9212 through firmware
update. Click the firmware update on the right side of the page; the following window will pop up.
Step1 : Click “firmware update“，you will see follow webpage :
Note: Do not click “ update “ if no firmware file update.
Step2: Click update button, the following window will pop up.
Step3: Click the Brower button to find the corresponding update file (you can download it from
our web site or ask it from the dealer), then click Update button to start update firmware. When
the update is finished, you must wait one minute before you restart the IP Power.
NOTICE:
* Due to network transfer unstable, to update the firmware (BIN) file, please arrange in
Ethernet-Local LAN.
* Please check with your reseller /distributor / importer for the update news.
* If update fail please refer chapter 11 “ Webpage Customization “
Step 4 after finish update please waits some second and then re-log in

PS: If use DHCP please enable DHCP
Note: ：
1)If the Port is 80 then you can directly update。
2) If update fail ，you can manual reset the device and update again .