Aviosys 9212 Delux User Manual
Page 21
- 20 -
* Http Command Verification: setup the control possibility from HTTP command or
SDK (VB & VC)
1. Select “ Cookie +Base64 “: enable Http command & SDK control
2. Select “ Cookie “: disable Http command & SDK control
2-1 IP address Settings: Ethernet (LAN) and Internet (WAN)
2-1-1 Local Area Network (LAN):
In LAN, you can set a fixed IP address or gain it from a DHCP server automatically. We suggest
to use a fixed IP address in order to let the other computers can visit the 9212 Delux.
Now type the new IP address in the address field of IE, you can visit the 9212 Delux. You also
can use the ipedit.exe to find the IP Power 9212 and modify its IP address.
2-1-2 Works on Internet (WAN):
User can set the IP provided by your ISP. If the 9212 Delux has a public IP address,
you can control it through the Internet. 9212 Delux supports fixed IP, DHCP.
* IP Address: please type in the IP address provided by your ISP. If IP Power 9212 Deluxe is
working with a Router, please refer to the network settings of the Router.
* Subnet Mask: please type in the Subnet Mask provided by your ISP. If IP Power 9212 Delux is
working with a Router, please refer to the network settings of the Router.
* Default gateway: please type in the Default Gateway provided by your ISP. If IP Power 9212
Delux is working with a Router, please refer to the network settings of the Router.
* DNS Server: please fill in the IP address of DNS server. If you are in Taiwan, you can set it to
168.95.1.1.
* DHCP Clients: Enable– activate DHCP service. DHCP will assign IP address for each PC.
Disable – shut down the DHCP service. You can set the IP address by yourself.
* Beeper: Enable – activate the beeper. Disable – turn off the beeper.
If you control the IP Power 9212 Delux through the web page, the beeper will
beep once when the operation work.
Note:
1) IP address format is: xxx.xxx.xxx.xxx: yyyyy.
yyyyy represents the port number which ranges from 1 to 32767.
2) Subnet Mask: from 0 to 254 (xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254)
3) If DHCP is disabled, user must set the TCP Port and default Gateway .If DHCP is
enabled, then the TCP port will be preset to 80( xxx.xxx.xxx.xxx: 80) and the
The DHCP server will set default gateway, too.
4) If the TCP port you set is not 80, your should type in the whole IP address and port in
IE or Netscape, such asor you can use the ipedit.exe
to login into the virtual IP of IP Power 9212 Delux.