Aviosys 9212 Delux - Manual (Page 24)

IP POWER 9212 USER MANUAL
VER. 1.10 - 23 -
5. User can Auto control the DO of 9212Delux by DI status change
One DI can control 1~ 8 DO. You can also control other 9212Delux devices and
units.
The P5 area bottom of 9201 Input (of 9212Delux) can be used to control the LO.
 Dynamic: as LO for one time, the DO part changes one time.
 Static: as LO for one time, the DO keeps changing.
Note: When you enable this function - DI controls DO, “ SET I/O “ will be disable.
If press the button ”Setting IN 1-8“ then you will get following page so you can setup DI
and DO settings.
In this screen you can select which Inputs activate which Outputs. From the picture
above, when the DI (IN7) is detected the DO(Out7) will be activated.