Aviosys 9212 Delux - Manual (Page 29)

- 28 -
Internal Clock Settings & Network Time Protocol (NTP):
* User can enter the internal clock settings: year, month, day, hour, minutes and second.
* NTP function: customer can synchronize the time of 9212 to the Internet web address time.
Please refer following the NTP server IP address:
* 131.246.9.116
* 139.18.25.34
* 128.176.191.9
Note: To work NTP, please do set up in e-mail and have to receive e-mail from 9212.
Network wakeup:
Remote Wake up PC by MAC address in Ethernet (LAN)
Use Network port (RJ45), you can wake PC on WAN by PC `s MAC address.
Wake On LAN (WOL) premise:
(1) The main board needs to support “WOL“ function. There must be a port to connect to your
network card. If your Main board supports WOL ，you can enable this function in BIOS
setting，you could find this function in Power Management of BIOS setting.
(2) Your network card must support “WOL”, remember to connect your connect cable to Main
board or the network card can not send “power on” message to your main board.
After setup in main board and network card, you can use WOL function by following
two-step:
Step 1: Log in 9212 web page and go to “Network Wakeup”
Step 2: Type in your MAC address then press “send ” – the PC will be power ON.